PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
Note
After the engine switch is turned off, the audio and visual system requires approximately a minute to record various types of memory and settings. As a result, after turning the engine switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.
Note
When replacing the radio receiver assembly, always replace it with a new one.
If a radio receiver assembly which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The radio receiver assembly may not operate normally.
When replacing the DCM (telematics transceiver), make sure to replace it with a new one. (w/ Telematics Transceiver)
PRECAUTION FOR AUDIO AND VISUAL SYSTEM
If replacing the DCM (telematics transceiver), refer to Initialization of Repair Instruction. (w/ Telematics Transceiver except G-BOOK)