AUDIO AND VISUAL SYSTEM(for 10.3 Inch Display), Diagnostic DTC:U0073, U0100, U0129, U0140, U0155, U0164, U0198, U023B, U0265, U1110

DTC Code DTC Name
U0073 Sending Malfunction (Navigation to APGS)
U0100 Engine ECU Communication
U0129 VSC(ECB)ECU Communication
U0140 Lost Communication with Body Control Module
U0155 Meter ECU Communication
U0164 Air Conditioner ECU Communication
U0198 Lost Communication with Telematic Control Module
U023B Lost Communication with Image Processing Module "B"
U0265 Lost Communication with Image Processing Sensor A
U1110 Clearance Sonar ECU Communication

DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Sending Malfunction (Navigation to APGS) CAN bus connection error CAN communication system
U0100 Engine ECU Communication CAN reception error CAN communication system
U0129 VSC(ECB)ECU Communication CAN reception error CAN communication system
U0140 Lost Communication with Body Control Module CAN reception error CAN communication system
U0155 Meter ECU Communication CAN reception error CAN communication system
U0164 Air Conditioner ECU Communication CAN reception error CAN communication system
U0198 Lost Communication with Telematic Control Module CAN reception error CAN communication system
U023B Lost Communication with Image Processing Module "B" CAN reception error CAN communication system
U0265 Lost Communication with Image Processing Sensor A CAN reception error CAN communication system
U1110 Clearance Sonar ECU Communication CAN reception error CAN communication system

PROCEDURE


  1. CHECK DTC (CAN COMMUNICATION SYSTEM)


    1. Clear the DTCs.

      Click here


      Body Electrical > Navigation System > Clear DTCs

    2. Turn the engine switch off.

    3. Turn the engine switch on (IG) and wait for 30 seconds.

    4. Recheck for DTCs and check if the same DTC is output again.

      Click here


      Body Electrical > Navigation System > Trouble Codes
      OK
      No DTCs are output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here