AUDIO AND VISUAL SYSTEM(for 10.3 Inch Display), Diagnostic DTC:B15F6

DTC Code DTC Name
B15F6 Main Body ECU Vehicle Information Reading/Writing Process Malfunction

DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the audio and visual system vehicle customization screen.

Tech Tips

The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the multi-display assembly screen:


  • Power door lock control system

  • Wireless door lock control system

  • Lighting system (INT)

  • Lighting system (EXT)

DTC No. Detection Item DTC Detection Condition Trouble Area
B15F6 Main Body ECU Vehicle Information Reading/Writing Process Malfunction Main body ECU (multiplex network body ECU) vehicle setting processing error.

  • CAN communication system

  • Power door lock control system

  • Wireless door lock control system

  • Lighting system (INT)

  • Lighting system (EXT)

  • Main body ECU (multiplex network body ECU)

  • Radio receiver assembly

CAUTION / NOTICE / HINT

Note


  • When replacing the radio receiver assembly, always replace it with a new one.

    If a radio receiver assembly which was installed to another vehicle is used, the following may occur:


    • A communication malfunction DTC may be stored.

    • The radio receiver assembly may not operate normally.

  • Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.

Tech Tips

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.

Click here

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Use the GTS to check if the CAN communication system is functioning normally.

      Click here

      OK
      CAN communication DTCs are not output.
      Result
      Proceed to
      OK
      NG

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here

    OK

  2. CHECK POWER DOOR LOCK CONTROL SYSTEM


    1. Check if the power door lock control system is malfunctioning.

      Click here

      Tech Tips

      Customization may not be possible depending on the malfunction in the power door lock control system.

      OK
      No malfunctions are present in the power door lock control system.
      Result
      Proceed to
      OK
      NG

    NG

    GO TO POWER DOOR LOCK CONTROL SYSTEM Click here

    OK

  3. CHECK WIRELESS DOOR LOCK CONTROL SYSTEM


    1. Check if the wireless door lock control system is malfunctioning.

      Click here

      Tech Tips

      Customization may not be possible depending on the malfunction in the wireless door lock control system.

      OK
      No malfunctions are present in the wireless door lock control system.
      Result
      Proceed to
      OK
      NG

    NG

    GO TO WIRELESS DOOR LOCK CONTROL SYSTEM Click here

    OK

  4. CHECK LIGHTING SYSTEM (INT)


    1. Check if the lighting system (INT) is malfunctioning.

      Click here

      Tech Tips

      Customization may not be possible depending on the malfunction in the lighting system (INT).

      OK
      No malfunctions are present in the lighting system (INT).
      Result
      Proceed to
      OK
      NG

    NG

    GO TO LIGHTING SYSTEM (INT) Click here

    OK

  5. CHECK LIGHTING SYSTEM (EXT)


    1. Check if the lighting system (EXT) is malfunctioning.

      Click here

      Tech Tips

      Customization may not be possible depending on the malfunction in the lighting system (EXT).

      OK
      No malfunctions are present in the lighting system (EXT).
      Result
      Proceed to
      OK
      NG

    NG

    GO TO LIGHTING SYSTEM (EXT) Click here

    OK

  6. CHECK CUSTOMIZE ITEMS


    1. Display the "Vehicle Customization" screen.

    2. Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

      Tech Tips

      These items shown as customizable via the audio and visual system vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.


      1. To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the multi-display assembly screen.

        Click here

      2. To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the wireless door lock control system related items that can be customized via the multi-display assembly screen.

        Click here

      3. To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the lighting system (INT) related items that can be customized via the multi-display assembly screen.

        Click here

      4. To match-up the items in the multi-display assembly with the items on the GTS, check the customize parameters list for the lighting system (EXT) related items that can be customized via the multi-display assembly screen.

        Click here

    3. Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the multi-display assembly screen.

      OK
      The items available for customization via the multi-display assembly screen can be customized successfully using the GTS.
      Result
      Proceed to
      OK
      NG

    OK

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    NG

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here