AUDIO AND VISUAL SYSTEM(for 10.3 Inch Display) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING WITH MULTI-DISPLAY ASSEMBLY


    1. Turn the engine switch on (IG).

    2. Using the multi-display assembly, select "Setup", "General", and then feedback force and change the customize setting.

      Item Default Content Setting Relevant ECU
      Feedback Force 2 Setting for the level of vibration feedback reaction force of the remote touch on the touch screen* Off, 1, 2 or 3 Radio receiver assembly
      NO VIBRATION/LEVEL1/LEVEL2/LEVEL3

      Tech Tips

      *: The higher the set value, the stronger the touch screen vibration feedback reaction force becomes.

    3. Using the multi-display assembly, select "Setup", "General", and then cursor speed and change the customize setting.

      Item Default Content Setting Relevant ECU
      Cursor speed Normal Setting for the speed at which the pointer/cursor moves when the touch screen is touched with a finger Slow, Normal, or Fast Radio receiver assembly
      SLOW/NORMAL/FAST

    4. Using the multi-display assembly, select "Setup", "General", and then multi-touch command and change the customize setting.

      Item Default Content Setting Relevant ECU
      Multi-touch command On Enable/disable 2-finger cursor operation function ON, OFF Radio receiver assembly
      ON/OFF