HEATED STEERING WHEEL CONTROLLER(w/ Steering Wheel Vibration) REMOVAL

PROCEDURE


  1. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  2. REMOVE CRUISE CONTROL MAIN SWITCH

    Click here

  3. REMOVE STEERING PAD SWITCH ASSEMBLY

    Click here

  4. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)

    Click here

  5. REMOVE STEERING WHEEL HEATER CONTROL ASSEMBLY


    1. B005A24

      Disengage the guide to remove the wire harness from the lower steering wheel cover.

    2. Disconnect the 2 connectors.

    3. B005812C01
      *1 Heater Thermistor

      Remove the screw.

    4. Disengage the 2 claws of the lower steering wheel boss cover.

      Tech Tips

      Do not remove the lower steering wheel boss cover from the steering wheel sub-assembly. Loosen the lower steering boss cover.

      Note

      If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.

    5. B005AKP

      Remove the 2 screws.

    6. Move the steering wheel heater control assembly until it reaches a position where the connecter can be disconnected.

    7. Disengage the connector to remove the steering wheel heater control assembly from the lower steering wheel cover.