STEERING COLUMN ASSEMBLY(for Power Tilt and Power Telescopic Steering Column) DISASSEMBLY

CAUTION / NOTICE / HINT

Note


  • When using a vise, place aluminum plates between the part and vise.

  • When using a vise, do not overtighten it.

PROCEDURE


  1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY


    1. Secure the electric power steering column sub-assembly in a vise.

    2. Using a center punch, mark the center of the 2 tapered-head bolts.

    3. Using a 3 to 4 mm (0.119 to 0.157 in.) drill, drill a hole in the 2 bolts.

    4. A01HIKLC01
      *a Screw Extractor

      Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the electric power steering column sub-assembly.

  2. REMOVE POWER STEERING ECU ASSEMBLY

    Click here

  3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

    Click here