POWER STEERING ECU(for Manual Tilt and Manual Telescopic Steering Column) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL POWER STEERING ECU ASSEMBLY


    1. Install the power steering ECU assembly with 2 new bolts.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    2. Install 3 new terminal bolts.

      Torque:
      3.2 N*m  { 33 kgf*cm, 28 in.*lbf }

    3. Connect the connectors and 2 harness clamps, and install a new ECU wire sub-assembly to the power steering ECU assembly.

    4. Install 2 new power steering ECU protectors to the power steering ECU assembly.

  2. INSTALL ELECTRIC POWER STEERING COLUMN SUB-ASSEMBLY

    Click here

  3. PERFORM ASSIST MAP WRITING

    Click here