VACUUM PUMP(for 3ZR-FAE) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips

The vacuum pump assembly is listed as one of the 200000 km (124000 mile) maintenance parts. Make sure to disassemble and inspect it every 200000 km (124000 miles) and replace parts as necessary.

PROCEDURE


  1. DISCONNECT ENGINE WIRE

    Click here

  2. DISCONNECT UNION TO CONNECTOR TUBE HOSE


    1. A01HIMV

      Slide the clip and disconnect the union to connector tube hose from the vacuum pump assembly.

  3. REMOVE VACUUM PUMP ASSEMBLY


    1. A01HH7O

      Remove the 3 bolts and vacuum pump assembly from the engine assembly.

      Note

      As 2 different lengths of bolts are used, make sure to make a note of the installation positions.

    2. A01HGTKC01
      *1 No. 2 O-ring
      *2 No. 3 O-ring
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, remove the No. 2 and No. 3 O-rings from the vacuum pump assembly.

      Note

      Do not damage the groove.