BRAKE BOOSTER(for LHD) INSTALLATION

PROCEDURE

1. INSTALL VACUUM WARNING SWITCH GROMMET (w/ Vacuum Warning Switch)

   Click here

2. INSTALL VACUUM WARNING SWITCH ASSEMBLY (w/ Vacuum Warning Switch)

   Click here

3. INSTALL VACUUM SENSOR GROMMET (w/ Vacuum Sensor)

   Click here

4. INSTALL VACUUM SENSOR ASSEMBLY (w/ Vacuum Sensor)

   Click here

5. INSTALL CHECK VALVE GROMMET

   
   

   1. Install a new check valve grommet to the brake booster assembly.

6. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY

   
   

   1. Install the brake vacuum check valve assembly to the check valve grommet.

7. INSTALL BRAKE BOOSTER GASKET

   
   

   1. Install a new brake booster gasket to the brake booster assembly.

8. INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS

   
   

   1. Install the brake master cylinder push rod clevis to the brake booster assembly.

9. INSTALL BRAKE BOOSTER ASSEMBLY

   
   

   1. Install the brake booster assembly with the 4 nuts.

      Torque:

      12.7 N*m  { 130 kgf*cm, 9 ft.*lbf }

   2. w/ Vacuum Sensor:

      Connect the connector to the vacuum sensor assembly.

   3. w/ Vacuum Warning Switch:

      Connect the connector to the vacuum warning switch assembly.

10. INSTALL PUSH ROD PIN

    Click here

11. INSTALL BRAKE PEDAL RETURN SPRING

    Click here

12. INSPECT AND ADJUST BRAKE BOOSTER PUSH ROD

    Click here

13. CONNECT VACUUM HOSE

    
    

    1. Connect the vacuum hose to the brake vacuum check valve assembly, and slide the clip to secure it.

14. INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY

    Click here

15. INSTALL BRAKE ACTUATOR ASSEMBLY WITH BRACKET

    Click here

16. INSTALL COWL BODY MOUNTING REINFORCEMENT LH

    
    

    1. Install the cowl body mounting reinforcement LH with the 2 nuts.

       Torque:

       50 N*m  { 510 kgf*cm, 37 ft.*lbf }

17. INSTALL OUTER COWL TOP PANEL

    Click here

18. INSTALL SUSPENSION TOWER DAMPER (w/ Performance Damper)

    Click here

19. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

20. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    
    

    1. for 3ZR-FAE:

       Click here

    2. for 8AR-FTS:

       Click here

21. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

23. BLEED BRAKE SYSTEM

    Click here

24. CHECK AND ADJUST BRAKE PEDAL

    Click here