REAR BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The following procedure is for the LH side.

Note

It the RH side flexible hose and LH side flexible hose are both removed from the vehicle at the same time, place an identification mark on each hose so that it can be reinstalled to its original position.

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  3. REMOVE REAR FLEXIBLE HOSE LH


    1. A01HG6G

      Using a union nut wrench, disconnect the brake tube from the rear flexible hose LH while holding the rear flexible hose LH with a wrench.

      Note


      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

    2. Remove the clip.

    3. A01XN8B

      Remove the union bolt and gasket, and then remove the rear flexible hose LH from the rear disc brake cylinder assembly LH.