BRAKE ACTUATOR REASSEMBLY

PROCEDURE


  1. INSTALL BRAKE ACTUATOR BOLT CUSHION


    1. Install the 4 brake actuator bolt cushions to the brake actuator bracket.

  2. INSTALL BRAKE ACTUATOR CASE COLLAR


    1. Install the 4 brake actuator case collars to the brake actuator bolt cushions.

      Note

      Make sure the brake actuator case collars are in full contact with the brake actuator bolt cushions.

  3. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY


    1. A01HHS5N01

      Install the brake actuator bracket assembly to the brake actuator assembly with the 4 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note


      • Tighten the 4 bolts uniformly in alphabetical order.

      • A new brake actuator is filled with brake fluid. Therefore, make sure to connect the brake tube before removing the hole plug.