PROCEDURE
INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
Connect the connector to the tire pressure warning ECU and receiver.
Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.
Install the bolt.
INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
INSTALL UPPER DECK TRIM SIDE BOARD LH
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
INSTALL ROPE HOOK ASSEMBLY
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL NO. 1 SEAT LEG ASSEMBLY
for Manual Seat: Click here
for Power Seat: Click here
INSTALL BATTERY SERVICE COVER BOARD
for Manual Seat: Click here
for Power Seat: Click here
INSTALL REAR FLOOR FINISH PLATE
INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY
INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY
INSTALL DECK FLOOR BOX RH
INSTALL DECK FLOOR BOX LH
INSTALL SPARE TIRE
INSTALL REAR DECK FLOOR BOX
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY
INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
INSTALL DECK BOARD ASSEMBLY
INSTALL TONNEAU COVER ASSEMBLY
INSTALL REAR SEAT ASSEMBLY
for Manual Seat: Click here
for Power Seat: Click here
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
REGISTRATION OF TRANSMITTER ID
INSPECT TIRE PRESSURE WARNING SYSTEM
PERFORM INITIALIZATION