WHEEL OPENING MOULDING(for Rear) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH

   Tech Tips

   When installing the quarter outside moulding sub-assembly LH, heat the vehicle body and quarter outside moulding sub-assembly LH using a heat light.

   Standard
   Item Temperature Vehicle Body 40 to 60°C (104 to 140°F) Quarter Outside Moulding Sub-assembly LH 20 to 30°C (68 to 86°F)

   Note

   Do not heat the vehicle body and quarter outside moulding sub-assembly LH excessively.

   
   

   1. Clean the vehicle body surface.

      
      

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install the quarter outside moulding sub-assembly LH.

      
      

      1. Using a heat light, heat the vehicle body.

      2. Remove the peeling paper from the face of the No. 5 moulding tape.

         Tech Tips

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

   3. Attach the 4 claws and 3 clips so as to apply the No. 5 moulding tape and install the quarter outside moulding sub-assembly LH.

   4. Using a 4 mm hexagon socket wrench, install the hexagon screw.

   5. Install the 3 clips.