ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE ROOF RACK ASSEMBLY (w/ Roof Rack)

    Click here

  2. REMOVE ROOF DRIP SIDE FINISH MOULDING LH (w/ Roof Rack)


    1. A01HFT6C01
      *1 Protective Tape

      Put protective tape around the roof drip side finish moulding LH.

    2. A01HG81C01
      *1 Double-sided Tape

      Using moulding remover D, detach the clip and remove the roof drip side finish moulding LH.

  3. REMOVE REAR ROOF DRIP SIDE FINISH MOULDING LH (w/ Roof Rack)


    1. A01HGU8C01
      *1 Protective Tape

      Put protective tape around the rear roof drip side finish moulding LH.

    2. A01HG44

      Using moulding remover D, detach the clip and remove the rear roof drip side finish moulding LH.

  4. REMOVE ROOF DRIP SIDE FINISH MOULDING LH (w/o Roof Rack, except Glass Roof)


    1. A01HJJ7C01
      *1 Protective Tape

      Put protective tape around the roof drip side finish moulding LH.

    2. A01HICAC01
      *1 Double-sided Tape

      Using moulding remover D, detach the 2 clips and remove the roof drip side finish moulding LH.

  5. REMOVE ROOF DRIP SIDE FINISH MOULDING LH (for Glass Roof)


    1. A01HGLAC01
      *1 Protective Tape

      Put protective tape around the roof drip side finish moulding LH.

    2. A01HIDFC01
      *1 Double-sided Tape

      Using moulding remover D, detach the 2 clips and remove the roof drip side finish moulding LH.