REAR DOOR OUTSIDE MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH

    Tech Tips

    When removing the rear door lower outside moulding sub-assembly LH, heat the rear door panel and rear door lower outside moulding sub-assembly LH using a heat light.

    Standard
    Item Temperature
    Rear Door Panel 40 to 60°C (104 to 140°F)
    Rear Door Lower Outside moulding Sub-assembly LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door panel and rear door lower outside moulding sub-assembly LH excessively.


    1. Put protective tape around the rear door lower outside moulding sub-assembly LH.

      A01HI0RC01
      *1 Protective Tape - -
    2. A01HF3K

      Using moulding remover D, detach the 5 claws.

    3. A01HGSH

      Remove the hole cover.

    4. Remove the nut.

    5. A01HH4ZC01
      *1 Double-sided Tape

      Using moulding remover D, detach the 6 clips and remove the rear door lower outside moulding sub-assembly LH.

  2. REMOVE REAR DOOR NO. 2 WEATHERSTRIP LH


    1. A01HJVXC01
      *1 Double-sided Tape

      Detach the 6 clips and remove the rear door No. 2 weatherstrip LH.

  3. REMOVE REAR DOOR REAR UPPER OUTSIDE MOULDING LH

    Tech Tips

    When removing the rear door rear upper outside moulding LH, heat the rear door panel and rear door lower outside moulding LH using a heat light.

    Standard
    Item Temperature
    Rear Door Panel 40 to 60°C (104 to 140°F)
    Rear Door Rear Upper Outside Moulding LH 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear door panel and rear door rear upper outside moulding LH excessively.


    1. A01HFQKC01
      B0057RX Bolt
      B0059IK Clip

      Remove the clip.

    2. Remove the bolt.

    3. A01HGZMC01
      *1 Protective Tape

      Put protective tape around the rear door rear upper outside moulding LH.

    4. A01HHZOC01
      *1 Double-sided Tape

      Detach the 5 clips and remove the rear door rear upper outside moulding LH

  4. REMOVE OUTSIDE MOULDING RETAINER


    1. A01HF6MN01

      Turn the clip 90° and remove the clip.

    2. Detach the claw and remove the outside moulding retainer.