FRONT BUMPER(for Sport Package) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart.

Click here

PROCEDURE


  1. INSTALL FRONT BUMPER SIDE RETAINER LH

    Click here

  2. INSTALL FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

    Click here

  4. INSTALL LOWER RADIATOR AIR GUIDE PLATE

    Click here

  5. INSTALL FRONT BUMPER LOWER ABSORBER

    Click here

  6. INSTALL FRONT BUMPER ENERGY ABSORBER

    Click here

  7. INSTALL FRONT BUMPER ASSEMBLY


    1. w/ LEXUS Parking Assist-sensor System:

      Connect the 2 No. 3 engine room wire connectors.

    2. w/o LEXUS Parking Assist-sensor System:

      Connect the No. 3 engine room wire connector.

    3. Connect the 2 clearance light connectors.

    4. w/ Fog Light:

      Connect the 2 fog light connectors.

    5. w/ Headlight Cleaner System:


      1. Connect the headlight washer hose.

        Tech Tips

        Confirm that the headlight washer hose is not twisted.

    6. Attach the 10 claws to install the front bumper assembly.

      B0057CW
    7. B0059VI

      Install the 2 bolts.

    8. B00576LC02
      B0057KY Protective Tape

      Install the 2 clips.

    9. Remove the protective tape.

    10. B005B80

      Install the 6 screws.

  8. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH


    1. B005BAQ

      Install the front fender front splash shield LH with the 5 screws.

  9. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL NO. 1 MOULDING TAPE (for Front Fender)

    Click here

  11. INSTALL NO. 2 MOULDING TAPE (for Front Fender)

    Click here

  12. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH (for Front Fender)

    Click here

  13. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH (for Front Fender)

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL RADIATOR GRILLE PROTECTOR


    1. B0057T8

      Install the 2 radiator grille protectors.

  15. INSTALL RADIATOR SUPPORT OPENING COVER


    1. B005AX5

      Install the radiator support opening cover with the 10 clips.

  16. ADD WINDSHIELD WASHER FLUID (w/ Headlight Cleaner System)

    Click here

  17. ADJUST FOG LIGHT AIMING (w/ Fog Light)

    Click here

  18. ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

    Click here

    Tech Tips

    When only the front bumper assembly is removed and reinstalled, it is not necessary to adjust the front television camera assembly.(Such as when removing or installing the front bumper in order to remove or install the headlight assembly.)

  19. PERFORM CALIBRATION (w/ Intelligent Clearance Sonar System)

    Click here

  20. PERFORM CALIBRATION (w/o Intelligent Clearance Sonar System)

    Click here