HORN INSPECTION

PROCEDURE


  1. INSPECT HIGH PITCHED HORN ASSEMBLY

    A01HE4DC09
    *a

    Component without harness connected

    (High Pitched Horn Assembly)

    1. Apply battery voltage and check operation of the high pitched horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Horn body

      		 High pitched horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY

    A01HG6LC10
    *a

    Component without harness connected

    (Low Pitched Horn Assembly)

    1. Apply battery voltage and check operation of the low pitched horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Horn body

      		 Low pitched horn sounds

      If the result is not as specified, replace the low pitched horn assembly.