STOP LIGHT CONTROL RELAY(for LHD) REMOVAL

PROCEDURE

1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH

   Click here

2. REMOVE COWL SIDE TRIM BOARD LH

   Click here

3. REMOVE INSTRUMENT SIDE PANEL LH

   Click here

4. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

5. REMOVE REAR CONSOLE ARMREST ASSEMBLY

   Click here

6. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH

   Click here

7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

8. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

9. REMOVE STOP LIGHT CONTROL ECU ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. Detach the clamp and remove the stop light control ECU assembly.