PROCEDURE
INSTALL REAR BUMPER SIDE SUPPORT LH
Attach the 2 claws to install the rear bumper side support LH.
Attach the clip.
Install the screw.
INSTALL REAR BUMPER SIDE SUPPORT RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR BUMPER SIDE SEAL LH
Install the rear bumper side seal LH with 2 new grommets.
INSTALL REAR BUMPER SIDE SEAL RH
Tech Tips
Use the same procedure as for the LH side.
INSTALL REAR BUMPER NO. 1 REINFORCEMENT
Install the rear bumper No. 1 reinforcement with the 8 bolts.
INSTALL REAR BUMPER COVER
Attach the 16 claws to install the rear bumper cover.
w/ LEXUS Parking Assist-sensor System, w/ Hands Free Power Back Door, w/ Rear Fog Light:
Connect the connector.
Install the 2 screws labeled A.
Install the 4 screws labeled B.
| *a | Screw A | *b | Screw B |
Remove the protective tape.
Install the 2 clips.
Tech Tips
Use the same procedure to remove the clip on the other side.
INSTALL REAR BUMPER NO. 1 PLATE
Attach the 2 claws to install the rear bumper No. 1 plate.
Tech Tips
Use the same procedure for all rear bumper No. 1 plates.
INSTALL REAR FLOOR SIDE MEMBER COVER
Install the rear floor side member cover with the 8 clips.
INSTALL NO. 5 MOULDING TAPE
INSTALL REAR LOWER QUARTER MOULDING PROTECTOR LH
INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH
INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side.
INSPECT KICK DOOR CONTROL SENSOR
PERFORM CALIBRATION (w/ Intelligent Clearance Sonar System)
PERFORM CALIBRATION (w/o Intelligent Clearance Sonar System)