HEADLIGHT DIMMER SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing.

    Click here

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

    Click here

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

    Click here

  5. REMOVE TILT AND TELESCOPIC SWITCH (for Headlight Dimmer Switch LH Side Type, for Power Tilt and Power Telescopic Steering Column)

    Click here

  6. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. B005B2M

      Disconnect the connector.

    2. Detach the 2 claws and remove the headlight dimmer switch assembly.