LICENSE PLATE LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT LICENSE PLATE LIGHT ASSEMBLY LH


    1. A01HI0YC01
      *a

      Component without harness connected

      (License Plate Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Y4-1 (B)

      Battery negative (-) → Y4-2 (E)

      		 License plate light illuminates

      If the result is not as specified, replace the license plate light assembly LH.

  2. INSPECT LICENSE PLATE LIGHT ASSEMBLY RH


    1. A01HI0YC02
      *a

      Component without harness connected

      (License Plate Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Y5-1 (B)

      Battery negative (-) → Y5-2 (E)

      		 License plate light illuminates

      If the result is not as specified, replace the license plate light assembly RH.