REAR LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL REAR LIGHT ASSEMBLY LH


    1. B0058NEC01
      *a Pin
      *b Guide

      Attach the guide, clip and pin to set the rear light assembly LH.

    2. Install the 3 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

  2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  4. INSTALL BACK DOOR LOCK COVER (w/o Power Back Door)

    Click here

  5. INSTALL BACK DOOR LOCK COVER (w/ Power Back Door)

    Click here

  6. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door)

    Click here

  7. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door)

    Click here

  8. INSTALL PULL HANDLE (w/ Power Back Door)

    Click here

  9. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door)

    Click here

  10. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  11. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  12. INSTALL CENTER BACK DOOR GARNISH

    Click here