REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. B00597LC11
      *a

      Component without harness connected

      (Rear Light assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition

      Positive (+) → 2 (B)

      Negative (-) → 4 (E)

      		 Taillight illuminates

      Positive (+) → 3 (B)

      Negative (-) → 4 (E)

      		 Stop Light illuminates

      Positive (+) → 1 (B)

      Negative (-) → 4 (E)

      Back-up Light illuminates*A

      Rear Fog Light illuminates*B

      *A: w/o Rear Fog Light
      *B: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. B00597LC11
      *a

      Component without harness connected

      (Rear Light assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Battery Connection Specified Condition

      Positive (+) → 2 (B)

      Negative (-) → 4 (E)

      		 Taillight illuminates

      Positive (+) → 3 (B)

      Negative (-) → 4 (E)

      		 Stop Light illuminates

      Positive (+) → 1 (B)

      Negative (-) → 4 (E)

      Back-up Light illuminates*A

      Rear Fog Light illuminates*B

      *A: w/o Rear Fog Light
      *B: w/ Rear Fog Light

      If the result is not as specified, replace the rear light assembly RH.