REAR LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE CENTER BACK DOOR GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR FINISH COVER LH (w/o Power Back Door)

    Click here

  5. REMOVE BACK DOOR FINISH COVER RH (w/o Power Back Door)

    Click here

  6. REMOVE BACK DOOR TRIM BASE (w/ Power Back Door)

    Click here

  7. REMOVE PULL HANDLE (w/ Power Back Door)

    Click here

  8. REMOVE BACK DOOR LOCK COVER (w/o Power Back Door)

    Click here

  9. REMOVE BACK DOOR LOCK COVER (w/ Power Back Door)

    Click here

  10. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  11. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  12. REMOVE REAR LIGHT ASSEMBLY LH

    Note

    If the rear light assembly LH has been removed, replace the rear light gasket with a new one.


    1. A01HG8I

      Disconnect the connector.

    2. Remove the 3 nuts.

    3. B0059K3

      Remove the bolt.

    4. Detach the pin and clip and remove the rear light assembly LH.