CLEARANCE LIGHT ASSEMBLY(for LED Type Turn Signal Light) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL CLEARANCE LIGHT ASSEMBLY LH


    1. Attach the 3 claws to install the clearance light assembly LH.

    2. B0057ETC01
      B0057RX Screw
      B0059IK Clip

      Install the 3 screws and clip.

    3. Attach the 2 wire harness clamps.

    4. w/ Headlight Cleaner System:


      1. Attach the hose clamp.

      2. Attach the claw to connect the headlight cleaner hose.

  2. INSTALL FRONT BUMPER ASSEMBLY

    except Sport Package:

    Click here

    for Sport Package:

    Click here