REAR COMBINATION LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    1. B005A7KC01
      *a

      Component without harness connected

      (Rear Combination Light assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Q16-2 (STP)

      Battery negative (-) → Q16-4 (E)

      		 Stop light illuminates

      Battery positive (+) → Q16-3 (B)

      Battery negative (-) → Q16-4 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly LH.

  2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    1. A01HE3SC04
      *a

      Component without harness connected

      (Rear Combination Light assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → P13-2 (STP)

      Battery negative (-) → P13-4 (E)

      		 Stop light illuminates

      Battery positive (+) → P13-3 (B)

      Battery negative (-) → P13-4 (E)

      		 Taillight illuminates

      If the result is not as specified, replace the rear combination light assembly RH.