ADAPTIVE HIGH BEAM SYSTEM, Diagnostic DTC:B2437

DTC Code DTC Name
B2437 Camera High Temperature Malfunction

DESCRIPTION

The headlight ECU sub-assembly performs adaptive high beam system control based on forward recognition information from the forward recognition camera.

DTC No. Detection Item DTC Detection Condition Trouble Area
B2437 Camera High Temperature Malfunction

    Detection Condition:

  • Engine switch is on (IG) and automatic light control sensor recognizes that it is nighttime


    Malfunction Status:

  • High temperature condition signals are received from forward recognition camera

  • Check vehicle usage environment (history of usage in a high temperature environment)

  • Forward recognition camera

CAUTION / NOTICE / HINT

Note


  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.

  • If the forward recognition camera has been replaced or removed and installed, be sure to perform adjustment of the forward recognition camera.

    Click here

Tech Tips

DTC B2437 is only stored when it has been determined that it is dark based on the automatic light control sensor.

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Body Electrical > AFS > Clear DTCs

    2. Cover the automatic light control sensor.

    3. Turn the engine switch on (IG).

    4. Check for DTCs.

      Click here


      Body Electrical > AFS > Trouble Codes
      OK
      DTC B2437 is not output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

  2. CHECK FOR FORWARD RECOGNITION CAMERA


    1. Move the vehicle to a cool place and ensure that the forward recognition camera is within the normal operating temperature.

    2. Clear the DTCs.

      Click here


      Body Electrical > AFS > Clear DTCs

    3. Cover the automatic light control sensor.

    4. Turn the engine switch on (IG).

    5. Check for DTCs.

      Click here


      Body Electrical > AFS > Trouble Codes
      OK
      DTC B2437 is not output.
      Result
      Proceed to
      OK
      NG

    OK

    END (THE SYSTEM STOPPED OPERATING DUE TO HIGH TEMPERATURES)

    NG

    REPLACE FORWARD RECOGNITION CAMERA Click here