LIGHTING SYSTEM OPERATION CHECK


  1. AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


    1. Turn the engine switch on (IG).

    2. Turn the headlight dimmer switch (light control switch) to the AUTO position.

    3. Cover the automatic light control sensor.

    4. Check that the taillights and low beam headlights come on.

    5. Uncover the automatic light control sensor.

    6. Check that the low beam headlights and taillights turn off.

  2. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (for Door-linked Light Auto Turn-off System)


    1. Prepare the vehicle so that the engine switch on (IG) and the driver door is closed.

    2. Set the headlight dimmer switch (light control switch) to the tail, head or AUTO position to illuminate the lights.

    3. Turn the engine switch off and open the driver door. Check that the headlights, front fog lights*1, rear fog lights*2, taillights, clearance lights and license plate lights turn off.


      • *1: w/ Front Fog Light

      • *2: w/ Rear Fog Light

  3. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (except Door-linked Light Auto Turn-off System)


    • *1: w/ Front Fog Light

    • *2: w/ Rear Fog Light


    1. When headlight dimmer switch (light control switch) in AUTO position.


      1. Turn the engine switch on (IG).

      2. Turn the headlights, front fog lights*1, rear fog lights*2, clearance lights, taillights or license plate lights on.

      3. Turn the engine switch off.

      4. Check that all of lights go off immediately.

    2. When headlight dimmer switch (light control switch) in tail or head position.


      1. Turn the engine switch on (IG).

      2. Turn the headlights, front fog lights*1, rear fog lights*2, clearance lights, taillights or license plate lights on.

      3. Turn the engine switch off.

      4. Check that the headlights and front fog lights*1 go off immediately.

  4. LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (w/ Delay Function)

    Note

    This check is possible only when the "Light Auto OFF Delay" customize setting is set to "30 s" on the GTS. (The default setting is "30 s".)

    Click here


    1. When the taillights are on (low beam headlights are not on)


      1. Close all of the doors.

      2. Turn the engine switch on (IG).

      3. Turn the taillights on.

      4. Turn the engine switch off.

      5. Open the driver door.

      6. Check that all of the lights turn off immediately.

    2. When the low beam headlights are on


      1. Close all of the doors.

      2. Turn the engine switch on (IG).

      3. Turn the low beam headlights on.

      4. Turn the engine switch off.

      5. Open any of the doors.

      6. Close the door.

      7. Check that all of the lights turn off after 30 seconds (delay function).

        Tech Tips

        Before the lights turn off, if the lock button on the key is pushed after all of the doors are locked, all of the lights will turn off immediately.

  5. Note

    Vehicles displaying the Item "DRL Function" on the GTS:

    This check is possible only when the "DRL Function" customize setting is set to "ON" on the GTS. (The default setting is "ON".)

    Click here

    DAYTIME RUNNING LIGHT SYSTEM


    1. Headlight dimmer switch (light control switch) is in the off or AUTO position (and the low beam headlights are not turned on via the automatic light control system).

    2. Start the engine.

    3. Release the parking brake.

    4. Check that the daytime running lights come on.

  6. FOLLOW ME HOME SYSTEM (w/ Follow Me Home System)

    Note

    This check is possible only when the "Follow Me Home Lighting Time" customize setting is set to "30 s" on the GTS. (The default setting is "30 s".)

    Click here


    1. The follow me home system is designed to illuminate the low beam headlights for approximately 30 seconds after the vehicle is parked.


      1. This system is controlled by the main body ECU (multiplex network body ECU).

      2. This system is enabled when the following conditions are met:


        • The engine switch is off.

        • The light control switch is in the off or AUTO position.

        • The light control switch is pulled to flash the headlights once.

  7. WELCOME LIGHT ILLUMINATION CONTROL OPERATION CHECK

    Note

    This check is possible only when the "Light up Clearance Lights at Door Unlock Function" customize setting is set to "ON" on the GTS. (The default setting is "ON".)

    Click here


    1. Turn the engine switch on (IG).

    2. Turn the headlight dimmer switch (light control switch) to the AUTO position.

    3. Cover the automatic light control sensor.

    4. Turn the engine switch off.

    5. Close and lock all doors.

    6. Unlock all doors by wireless door unlock or entry door unlock.

    7. Check that the taillights, clearance lights and license plate lights turn on for approximately 15 seconds.