WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/ Headlight Cleaner System)


    1. B005AAKC01
      *a Protrusion
      *b Marking

      Install the level warning switch assembly as shown in the illustration.

      Note

      Make sure that the protrusion of the level warning switch assembly is between the 2 markings.

    2. Install the headlight cleaner motor and pump.

    3. Attach the guide to install the windshield washer jar assembly with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    4. Attach the 7 clamps and connect the 2 connectors.

  2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY (w/o Headlight Cleaner System)


    1. B005AAKC01
      *a Protrusion
      *b Marking

      Install the level warning switch assembly as shown in the illustration.

      Note

      Make sure that the protrusion of the level warning switch assembly is between the 2 markings.

    2. Attach the guide to install the windshield washer jar assembly with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Attach the 7 clamps and connect the connector.

  3. INSTALL WASHER INLET SUB-ASSEMBLY


    1. Install the washer inlet sub-assembly to the windshield washer jar assembly.

    2. Install the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  4. INSTALL FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  5. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

    Click here

  6. INSTALL NO. 1 MOULDING TAPE

    Click here

  7. INSTALL NO. 2 MOULDING TAPE

    Click here

  8. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH

    Click here

  9. INSTALL RADIATOR GRILLE PROTECTOR

    Click here

  10. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here

  11. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. B00584NC02
      *a Protrusion
      *b Marking

      Install the windshield washer motor and pump assembly as shown in the illustration.

      Note

      Make sure that the protrusion of the windshield washer motor and pump assembly is between the 2 markings.

    2. Connect the connector.

    3. Connect the rear washer hose.

  12. FILL UP WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID


    1. Connect the washer hose to the windshield washer motor and pump, and fill the washer jar with washer fluid.

  13. INSTALL FRONT FENDER LINER RH


    1. B0059BI

      Install the front fender liner RH with the 6 clips and screw.

    2. B005AH6

      Install the 2 new grommets.

    3. Using a 4 mm hexagon wrench, install the hexagon screw.

  14. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  15. INSTALL NO. 1 MOULDING TAPE

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  16. INSTALL NO. 2 MOULDING TAPE

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  17. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  18. INSTALL FRONT WHEEL RH

    Click here