WASHER MOTOR INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Front Side)

    Tech Tips

    This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


    1. With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.

    2. A01HGRLC27
      *a Component without harness connected (Windshield Washer Motor and Pump Assembly)

      Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Washer fluid is pumped to front side

      If the result is not as specified, replace the windshield washer motor and pump assembly.

  2. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Rear Side)

    A01HGRLC28
    *a Component without harness connected (Windshield Washer Motor and Pump Assembly)

    Tech Tips

    This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


    1. With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.

    2. Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 Washer fluid is pumped to rear side

      If the result is not as specified, replace the windshield washer motor and pump assembly.