WASHER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL RH

    Click here

  2. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  3. REMOVE NO. 1 MOULDING TAPE

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  4. REMOVE NO. 2 MOULDING TAPE

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  5. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  6. REMOVE FRONT FENDER LINER RH


    1. B005AH6

      Using a 4 mm hexagon wrench, remove the hexagon screw and the 2 grommets.

    2. B0059BI

      Remove the 6 clips, screw and front fender liner RH.

  7. DRAIN WINDSHIELD WASHER FLUID


    1. B0058IX

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  8. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. B0059YU

      Disconnect the connector and rear washer hose.

    2. B0059N4

      Pull out the windshield washer motor and pump assembly from the packing of the windshield washer jar assembly.

  9. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  10. REMOVE RADIATOR GRILLE PROTECTOR

    Click here

  11. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH

    Click here

  12. REMOVE NO. 1 MOULDING TAPE

    Click here

  13. REMOVE NO. 2 MOULDING TAPE

    Click here

  14. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH

    Click here

  15. REMOVE FRONT BUMPER COVER


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here

  16. REMOVE WASHER INLET SUB-ASSEMBLY


    1. B0058SP

      Remove the bolt.

    2. Pull the washer inlet sub-assembly upward to remove it from the windshield washer jar assembly.

  17. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (w/o Headlight Cleaner System)


    1. Disconnect the connector and detach the 7 clamps.

      B005A79C02
      *a Guide A - -

    2. Remove the 3 bolts. Then detach guide A and remove the windshield washer jar and pump assembly.

    3. B005AZB

      Pull out the level warning switch assembly in the direction indicated by the arrow in the illustration to remove it.

  18. REMOVE WINDSHIELD WASHER JAR ASSEMBLY (w/ Headlight Cleaner System)


    1. Disconnect the 2 connectors and detach the 7 clamps.

      B0056Z3C01
      *a Guide A - -

    2. Remove the 3 bolts. Then detach guide A and remove the windshield washer jar and pump assembly.

    3. B0058JZ

      Remove the headlight cleaner motor and pump assembly.

    4. B005AZB

      Pull out the level warning switch assembly in the direction indicated by the arrow in the illustration to remove it.