RELAY ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT NO. 1 MIRROR RELAY

   
   

   1. Remove the No. 1 mirror relay.

   2. 

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher Battery voltage applied between terminals 1 and 2 Below 1 Ω 3 - 4 Battery voltage not applied between terminals 1 and 2 Below 1 Ω Battery voltage applied between terminals 1 and 2 10 kΩ or higher

      
      

      • If the result is not as specified, replace the No. 1 mirror relay.

2. INSPECT NO. 2 MIRROR RELAY

   
   

   1. Remove the No. 2 mirror relay.

   2. 

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition 3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher Battery voltage applied between terminals 1 and 2 Below 1 Ω 3 - 4 Battery voltage not applied between terminals 1 and 2 Below 1 Ω Battery voltage applied between terminals 1 and 2 10 kΩ or higher

      
      

      • If the result is not as specified, replace the No. 2 mirror relay.