DRIVING SUPPORT BUZZER INSPECTION

PROCEDURE


  1. INSPECT SKID CONTROL BUZZER (DRIVING SUPPORT BUZZER)

    B005AWIC02
    *a

    Component without harness connected

    (Skid Control Buzzer (Driving Support Buzzer))

    1. Apply battery voltage to the skid control buzzer (driving support buzzer), and check that the buzzer sounds.

      OK
      Measurement Condition Specified Condition
      Battery positive (+) → Terminal 2 (IG1) Skid control buzzer (driving support buzzer) sounds
      Battery negative (-) → Terminal 1 (BZ)

      If the result is not as specified, replace the skid control buzzer (driving support buzzer).