DRIVING SUPPORT ECU INSTALLATION

PROCEDURE


  1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

    Note

    Do not use a driving support ECU assembly which has been dropped or subjected to any strong shocks.


    1. B0057QZC01
      *A for LHD
      B0057RX Nut
      B0059IK Connector
      B005BDMC01
      *A for RHD
      B0057RX Nut
      B0059IK Connector

      Install the driving support ECU assembly with the nut.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Connect the connector.

  2. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here