DRIVING SUPPORT ECU INSTALLATION

PROCEDURE

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

   Note

   
   

   • Do not use a driving support ECU assembly which has been dropped or subjected to any strong shocks.

   • When a new driving support ECU assembly is installed, perform initialization.

     Click here

   
   

   1. Install the driving support ECU assembly with the nut.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the connector.

2. INSTALL RADIO RECEIVER ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here