DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:U010087, U010487, U012287

DTC Code DTC Name
U010087 Lost Communication With ECM/PCM "A" Missing Message
U010487 Lost Communication with Cruise Control Module
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message

DESCRIPTION

The ECM communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U010087 Lost Communication With ECM/PCM "A" Missing Message

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, the ECM continuously receives a communication cut-off signal from the skid control ECU (brake actuator assembly) for approximately 1 second or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, the ECM continuously receives a communication cut-off signal from the skid control ECU (brake actuator assembly) for approximately 1 second or more.

  • CAN communication system

  • ECM

  • Skid control ECU (brake actuator assembly)
U010487 Lost Communication with Cruise Control Module

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, a communication error between the driving support ECU assembly and ECM is detected for 1 second or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, a communication error between the driving support ECU assembly and ECM is detected for 1 second or more.

  • CAN communication system

  • ECM

  • Driving support ECU assembly
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message When the engine switch is on (IG) and the dynamic radar cruise control system is operating, a communication error between the skid control ECU (brake actuator assembly) and the ECM is detected for approximately 2.6 seconds or more.

  • CAN communication system

  • ECM

  • Skid control ECU (brake actuator assembly)

PROCEDURE


  1. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs

    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Result
      Result Proceed to
      DTC U010087, U010487 and U012287 are not output A
      DTC U010087, U010487 or U012287 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    GO TO CAN COMMUNICATION SYSTEM Click here