DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:P163081

DTC Code DTC Name
P163081 Communication Error from VSC to ECM Invalid Serial Data Received

DESCRIPTION

The skid control ECU (brake actuator assembly) sends signals such as cruise control cancel signals and brake demand response signals to the ECM when the dynamic radar cruise control system is operating.

DTC No. Detection Item DTC Detection Condition Trouble Area
P163081 Communication Error from VSC to ECM Invalid Serial Data Received

    w/o Full-speed range following function:

  • While the vehicle speed is 36 km/h (22 mph) or more and the dynamic radar cruise control system is operating, communication data from the skid control ECU (brake actuator assembly) is logically inconsistent for approximately 0.5 seconds or more.


    w/ Full-speed range following function:

  • While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, communication data from the skid control ECU (brake actuator assembly) is logically inconsistent for approximately 0.5 seconds or more.


  • CAN communication circuit

  • Skid control ECU (brake actuator assembly)

  • ECM

CAUTION / NOTICE / HINT

Note


  • Before replacing the ECM, refer to Service Bulletin.

  • First check the CAN communication system by following How to Proceed with Troubleshooting. After checking that there are no malfunctions in the CAN communication system, proceed with troubleshooting.

    Click here

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Using the GTS, check if the CAN communication system is functioning normally.

      Click here

      Result
      Result Proceed to
      CAN communication system DTCs are not output A
      CAN communication system DTCs are output B

    B
    A
  2. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs
    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Result
      Result Proceed to
      DTC P163081 is not output A
      DTC P163081 is output B

    A
    B
  3. REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)


    1. Replace the skid control ECU (brake actuator assembly).

      Click here

      Result
      Proceed to
      NEXT

    NEXT
  4. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs
    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Result
      Result Proceed to
      DTC P163081 is not output A
      DTC P163081 is output B

    A
    B