DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:P0575

DTC Code DTC Name
P0575 Cruise Control Input Circuit

DESCRIPTION

This DTC is stored when there is a malfunction in the ECM.

DTC No. Detection Item DTC Detection Condition Trouble Area
P0575 Cruise Control Input Circuit

  • While the dynamic radar cruise control system is operating, the dynamic radar cruise control system control of vehicle speed is not canceled and approximately 0.4 seconds have elapsed after cruise cancel signal (STP signal) is received by the ECM.

  • When the engine switch is turned on (IG), STP signals received by the ECM supervisory CPU and that received by the control ECU do not match for approximately 0.2 seconds or more.

 ECM

CAUTION / NOTICE / HINT

Note

Before replacing the ECM, refer to Service Bulletin.

PROCEDURE


  1. CHECK FOR DTCs (RADAR CRUISE 1)


    1. Clear the DTCs.

      Click here


      Powertrain > Radar Cruise1 > Clear DTCs

    2. Make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the system cannot detect the malfunction.

    3. Check for DTCs.

      Click here


      Powertrain > Radar Cruise1 > Trouble Codes
      Result
      Result Proceed to
      DTC P0575 is not output A
      DTC P0575 is output B

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE ECM Click here