STARTER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  6. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  7. REMOVE AIR CLEANER CAP AND HOSE

    Click here

  8. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. B0057ZX

      Remove the bolt and loosen the nut.

    2. Detach the hook of the battery clamp sub-assembly from the battery carrier assembly, and then remove the battery clamp sub-assembly.

  9. REMOVE BATTERY

  10. REMOVE BATTERY TRAY

  11. DISCONNECT RADIATOR HOSE SUB-ASSEMBLY


    1. B00575E

      Remove the 2 bolts and disconnect the radiator hose sub-assembly from the battery carrier assembly.

  12. REMOVE BATTERY CARRIER ASSEMBLY


    1. B0056Z0

      Remove the 4 bolts and battery carrier assembly.

  13. REMOVE BATTERY BRACKET REINFORCEMENT


    1. B00592W

      Remove the 2 bolts and battery bracket reinforcement.

  14. DISCONNECT OIL COOLER


    1. B005ABI

      Remove the 2 bolts and disconnect the oil cooler from the transmission oil cooler bracket.

  15. REMOVE TRANSMISSION OIL COOLER BRACKET


  16. REMOVE FLYWHEEL HOUSING SIDE COVER


    1. B005B33

      Push up the flywheel housing side cover as shown in the illustration to detach the claw, and remove the flywheel housing side cover.

  17. REMOVE STARTER ASSEMBLY


    1. B0057M4

      Disconnect the terminal cap.

    2. Remove the nut and disconnect the starter wire.

    3. Disconnect the starter connector.

    4. B0057HD

      Remove the 2 bolts and starter assembly.