STARTER(for 1.7 kW Type) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. B0059JA

      Remove the bolt and loosen the nut.

    2. Detach the hook of the battery clamp sub-assembly from the battery carrier assembly, and then remove the battery clamp sub-assembly.

  5. REMOVE BATTERY INSULATOR

  6. REMOVE BATTERY

  7. REMOVE BATTERY TRAY

  8. REMOVE BATTERY CARRIER ASSEMBLY


    1. B0059S1

      Detach the 6 clamps and disconnect the wire harness.

    2. Remove the 4 bolts and battery carrier assembly.

  9. REMOVE BATTERY BRACKET REINFORCEMENT


    1. B005A1B

      Remove the 2 bolts and battery bracket reinforcement.

  10. REMOVE STARTER ASSEMBLY


    1. B005AWH

      Open the terminal cap.

    2. Remove the nut and disconnect the starter wire.

    3. Disconnect the starter connector.

    4. Remove the 2 bolts and starter assembly.