OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   
   

   1. Remove any oil from the threads of the engine oil pressure switch assembly.

   2. Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

      Note

      Do not let adhesive adhere to the oil hole.

   3. Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Do not start the engine for at least 1 hour after installation.

   4. Connect the engine oil pressure switch assembly connector.

2. INSPECT FOR OIL LEAK

   Click here