ENGINE OIL TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE OIL TEMPERATURE SENSOR


    1. Install a new gasket to the engine oil temperature sensor.

    2. A01HIR9C02
      *a Torque Wrench Fulcrum Length

      Using a 19 mm ball joint lock nut wrench, install the engine oil temperature sensor to the stiffening crankcase assembly.

      Torque
      Specified tightening torque
      19.6 N*m (200 kgf*cm, 14 ft.*lbf)

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using ball joint lock nut wrench (fulcrum length of 150 mm (5.91 in.)) + torque wrench (fulcrum length of 162 mm (6.38 in.)): 10.2 N*m (104 kgf*cm, 8 ft.*lbf)

    3. Connect the engine oil temperature sensor connector.

  2. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  3. ADD ENGINE OIL

    Click here

  4. INSPECT ENGINE OIL LEVEL

    Click here

  5. INSPECT FOR OIL LEAK

    Click here