THERMOSTAT INSTALLATION

PROCEDURE


  1. INSTALL THERMOSTAT


    1. Install a new gasket to the thermostat.

    2. B0057F0C01
      *a Jiggle Valve

      Install the thermostat with the jiggle valve facing upward.

      Tech Tips

      The jiggle valve may be set to within 10° on either side of the prescribed position.

  2. INSTALL WATER INLET


    1. Install the water inlet with the 2 bolts and nut.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Attach the wire harness clamp.

  3. CONNECT NO. 2 RADIATOR HOSE


    1. Connect the No. 2 radiator hose to the water inlet, and slide the hose clip to secure the hose.

  4. CONNECT SUCTION HOSE SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  6. INSTALL INTAKE AIR RESONATOR

    Click here

  7. INSTALL COMPRESSOR OUTLET ELBOW

    Click here

  8. INSTALL NO. 5 EXHAUST MANIFOLD HEAT INSULATOR

    Click here

  9. INSTALL NO. 2 AIR CLEANER HOSE

    Click here

  10. INSTALL INTAKE AIR CONNECTOR

    Click here

  11. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  12. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT


  13. ADD ENGINE COOLANT

    Click here

  14. INSPECT FOR COOLANT LEAK

    Click here

  15. WARM UP ENGINE

    Click here

  16. INSPECT FOR REFRIGERANT LEAK