TURBOCHARGER REMOVAL

PROCEDURE


  1. DRAIN ENGINE OIL

    Click here

  2. DRAIN COOLANT (for Intercooler)

    Click here

  3. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

    Click here

  4. DISCONNECT NO. 1 TURBO WATER PIPE SUB-ASSEMBLY


    1. A01HGF7

      Slide the 2 clips and disconnect the No. 1 turbo water hose and No. 2 turbo water hose from the No. 1 turbo water pipe sub-assembly.

  5. DISCONNECT TURBO OIL INLET PIPE SUB-ASSEMBLY


    1. A01HI7M

      Remove the 2 bolts, union bolt and disconnect the turbo oil inlet pipe sub-assembly.

    2. Remove the union bolt side gasket.

  6. REMOVE TURBOCHARGER SUB-ASSEMBLY


    1. B005B4O

      Disconnect the vacuum transmitting hose assembly from the waste gate valve actuator with bracket assembly.

    2. A01HE5P

      Disconnect the air by-pass valve assembly connector and wire harness clamp from the turbocharger sub-assembly.

    3. A01HFNW

      Remove the 4 nuts and turbocharger sub-assembly.

    4. A01HJZ1

      Remove the gasket from the cylinder head sub-assembly.

    5. A01HEG1

      Remove the gasket from the turbo oil inlet pipe sub-assembly.

  7. REMOVE COMPRESSOR INLET ELBOW


    1. A01HF01

      Remove the 2 nuts and compressor inlet elbow.

    2. Remove the gasket.

  8. REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY


    1. A01HDVM

      Remove the bolt, 2 nuts and No. 1 turbo water pipe sub-assembly.

    2. A01HJ9S

      Remove the gasket.

  9. REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY


    1. A01HGPR

      Remove the 2 nuts and turbo oil inlet pipe sub-assembly.

    2. A01HH2N

      Remove the gasket.