FUEL TANK CAP INSPECTION

PROCEDURE


  1. INSPECT FUEL TANK CAP ASSEMBLY (w/ Canister Pump Module)


    1. A01HGLEC01
      *1 Fuel Tank Cap Gasket

      Visually check that the fuel tank cap assembly and fuel tank cap gasket are not deformed or damaged.

      If the result is not as specified, replace the fuel tank cap assembly or fuel tank cap gasket.

      Note

      Confirm that ID mark S is printed on the replacement fuel tank cap assembly.

      A01HGMGC03
      *a ID Mark

  2. INSPECT FUEL TANK CAP ASSEMBLY (w/o Canister Pump Module)


    1. A01HGLEC02
      *1 Fuel Tank Cap Gasket

      Visually check that the fuel tank cap assembly and fuel tank cap gasket are not deformed or damaged.

      If the result is not as specified, replace the fuel tank cap assembly or fuel tank cap gasket.