CANISTER(w/o Canister Pump Module) INSPECTION

PROCEDURE


  1. CHECK CHARCOAL CANISTER ASSEMBLY


    1. Visually check the fuel suction plate sub-assembly (canister).


      1. Visually check the fuel suction plate sub-assembly (canister) for cracks or damage.

      2. If cracks or damage are found, replace the fuel suction plate sub-assembly (canister).

    2. A01HEOFC02
      *a Port A
      *b Port B
      *c Port C
      B0057RX Air

      Close port C, apply compressed air to port A and check that air flows out from port B.

      If the result is not as specified, replace the fuel suction plate sub-assembly (canister).

    3. A01HI28C02
      *a Port A
      *b Port B
      *c Port C
      B0057RX Air

      Close port C, apply compressed air to port B and check that air flows out from port A.

      If the result is not as specified, replace the fuel suction plate sub-assembly (canister).

    4. A01HHODC02
      *a Port A
      *b Port B
      *c Port C
      B0057RX Air

      Apply compressed air to port B and check that air flows out from port A and port C.

      If the result is not as specified, replace the fuel suction plate sub-assembly (canister).

    5. A01HEMAC02
      *a Port A
      *b Port B
      *c Port C

      Close ports A and C, and apply compressed air to port B to check for leaks.

      If the result is not as specified, replace the fuel suction plate sub-assembly (canister).