FUEL INJECTOR(for Port Injection) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 FUEL PIPE SUB-ASSEMBLY

    Click here

  2. DISCONNECT FUEL TUBE SUB-ASSEMBLY


    1. B0059Q9

      Remove the fuel tube sub-assembly from the fuel delivery pipe.

      Click here

  3. REMOVE FUEL DELIVERY PIPE


    1. B005AKN

      Disconnect the No. 6 engine wire connector.

    2. Disconnect the 2 wire harness clamps from the fuel delivery pipe and wire harness clamp bracket.

    3. B0057TB

      Disconnect the 4 connectors from the 4 fuel injector assemblies.

    4. Remove the 2 bolts, and then remove the fuel delivery pipe together with fuel injector assembly.

      Note

      Be careful not to drop the fuel injector assembly when removing the fuel delivery pipe.

    5. A01HIKR

      Remove the 2 No. 1 delivery pipe spacers from the cylinder head sub-assembly.

    6. B005BHM

      Remove the 4 injector vibration insulators from the cylinder head sub-assembly.

  4. REMOVE FUEL INJECTOR ASSEMBLY


    1. B00598H

      Remove the 4 fuel injector assemblies from the fuel delivery pipe.

      Note

      If the fuel injector assemblies are to be reused, reinstall them to the same cylinder they came from.

    2. Remove the O-ring from each fuel injector assembly.

    3. For reinstallation, attach a tag or label with the corresponding cylinder number to each fuel injector assembly.

      Note

      Protect the fuel injector assemblies by covering them with plastic bags.