DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE REAR ENGINE UNDER COVER RH

    A01HH7B

    1. Remove the 4 clips and rear engine under cover RH.

  2. REMOVE FAN AND GENERATOR V BELT


    1. A01HJX0

      Using a tool, turn the pulley set bolt of the V-ribbed belt tensioner assembly counterclockwise to loosen the tension.

    2. A01HHTNC01
      *a Hexagon Wrench

      Using a 5 mm hexagon wrench, secure the V-ribbed belt tensioner assembly as shown in the illustration and remove the fan and generator V belt.