IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL SPARK PLUG

   
   

   1. Using a 14 mm spark plug wrench and 100 mm extension bar, install the 4 spark plugs.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      If a spark plug has been struck or dropped, replace it.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the spark plug.

      Click here

2. INSTALL IGNITION COIL ASSEMBLY

   
   
   1. 

      *a	Ignition Coil
      *b	Plug Cap

      Install the 4 ignition coil assemblies with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If an ignition coil assembly has been struck or dropped, replace it.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the ignition coil assembly.

      Click here

   2. Connect the 4 ignition coil assembly connectors.

3. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here