CAMSHAFT OIL CONTROL SOLENOID INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY


    1. A01HI1GC01
      *1 O-Ring

      Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly in the locations shown in the illustration.

    2. Install the camshaft timing oil control solenoid assembly with 2 new bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Be careful that the O-ring is not jammed.

    3. Connect the camshaft timing oil control solenoid assembly connector.